EN
86
EN
87
FIXING THE HAND WINCH
Mount the hand winch through the fix-
ing holes in the ground plate to a firm
base, using
10 mm bolts, washers and
lock washers (not included).
Ensure there is enough space to ro-
tate the crank
8
.
1.
Before you use the equipment to pull a
load, you must familiarize yourself with
the way in which the equipment works
“without a load“.
2.
Make sure the equipment is fastened
secu rely. Be particularly critical when
choosing a fastening point, as the fasten-
Before use
Intended use
The hand winch is a device for moving loads
horizontally, like vehicles, caravans and boats,
or perform tasks in not heavy agriculture and
forestry.
The tool is not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
The user is liable for all injuries to third parties
and damage to their property.
ing point you choose must be capable of
withstanding double the load. lf you are
unsure whether the point you have cho-
sen is the right one, select an alternative
point instead.
3.
Fasten the equipment in such a way that
it cannot change its position during use.
1
Pulley
2
Steel cable
3
Ratchet switch
4
Snap lock
5
Load hook
6
Axis bolt small gearwheel
7
Axis bolt big gearwheel
8
Crank
9
Handle crank
Product overview
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
1x
1x
3
9
4
5
8
7
6
2
1
