background image

EN

132

EN

133

Disposal

The 

crossed-out wheeled bin

 logo 

requires the separate collection of 

waste electric and electronic equip-

ment (WEEE). Such equipment may 

contain dangerous and hazardous substanc-

es. These tools must be returned to a desig-

nated collection point for the recycling of 

WEEE and must 

not

 be disposed as unsorted 

municipal waste. By doing so, you will help to 

conserve resources and protect the environ-

ment. Contact your local authorities for more 

information.

Children must not play with plastic bags and 

packaging material, due to possible injury or 

danger of suffocation. Store such material 

safely or dispose of environmentally friendly.

Used batteries must be disposed of properly.

Battery selling stores and municipal collection 

points offer special containers for battery dis-

posal.

Care & Maintenance

Caution!

 Make sure the tool is 

switched off and the battery re-

moved.

 - Always keep the tool clean, dry and free of 

oil or grease.

 - Wear safety glasses to protect your eyes 

whilst cleaning.

 - For safe and proper working, always keep 

the machine and ventilation slots clean.

 - Regularly check to see if any dust or for-

eign matter has entered the grills near the 

motor. Use a soft brush to remove any ac-

cumulated dust.

 - If the body of the tool needs cleaning, wipe 

it with a soft damp cloth. A mild detergent 

can be used but nothing like alcohol, petrol 

or other cleaning agent.

 - Never use caustic agents to clean plastic 

parts.

 - Periodically check all fixings. These could 

become loose with time due to vibration.

Sanding paper

Choose the adequate grain size for every op-

eration:

OPERATION 

GRAIN SIZE

Removal 

40  - 60

Preparation 

80  - 120

Finish 

180  - 240

Do not use the same sanding paper for metal 

and wood.

This Pattfield item has been produced accord-

ing to state-of-the-art production methods 

and is subject to ongoing strict quality control.

HORNBACH Baumarkt AG, Hornbachstrasse 

11, 76879 Bornheim, Germany, guarantees 

the quality of the machines according to the 

following terms and conditions.

1. Warranty Period

The warranty period is 3 years. The warranty 

period starts on the date of purchase. Please 

retain the original receipt or invoice in order 

to be able to furnish evidence of the date of 

purchase.

2. Warranty Scope

The warranty applies exclusively to production 

or material defects. The warranty applies only 

in the case of private use of the item.

The warranty does not apply to defects result-

ing from

• misuse or improper use,

• use of force or external influences,

• damage due to failure to observe the instal-

lation instructions or instructions for use,

• connecting to an incorrect grid voltage or 

current type,

• unprofessional installation,

• overloading the device,

•  use of non-approved attachments or acces-

sories,

• failure to observe the maintenance and 

safety instructions,

• entry of foreign matter into the device,

• wear and tear due to normal use or

• commercial use.

Furthermore, the warranty does not cover 

damage to parts subject to wear and tear, 

which is caused by normal wear and tear. The 

warranty does not comprise any collateral or 

consequential damage or possible installation 

and dismantling costs in the event of a war-

ranty incident.

3. Warranty Services

During the warranty period, the warrantor will 

inspect the defective item in order to deter-

mine whether a warranty incident is on hand. 

If a warranty incident is on hand, the warran-

tor will repair or replace the item at his own 

expense. If the item is no longer available at 

the time of the warranty incident, the warran-

tor may replace the item with a similar prod-

uct. The replaced item or part shall become 

property of the warrantor.

Warranty services (repair or replacement) do 

not extend the warranty period. Warranty ser-

vices do not result in any new warranty.

4. Warranty Claims

For warranty claims, please contact the near-

est HORNBACH DIY store. 

You can find it at www.hornbach.com.

Warranty claims will only be accepted if the 

original receipt or invoice is produced.

5. Statutory Rights

The warranty does not restrict your statutory 

rights regarding warranty and product liability.

Warranty

Summary of Contents for PE-20 DSB





































































Reviews: