GB
- 212 -
Danger!
When using the equipment, a few safety precautions must be obser-
ved to avoid injuries and damage. Please read the complete opera-
ting instructions and safety regulations with due care. Keep this ma-
nual in a safe place, so that the information is available at all times. If
you give the equipment to any other person, hand over these opera-
ting instructions and safety regulations as well. We cannot accept any
liability for damage or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and instructions
may result in an electric shock,
fi
re and/or serious injury.
Keep all sa-
fety regulations and instructions in a safe place for future use.
Explanation of the warning signs on the machine (Figure 8)
1. Important! Read the operating instructions and follow the war-
nings and safety instructions
2. Keep all other persons away from the danger
zone.
3. Caution! The cutter blades continue to run after the motor is swit-
ched o
ff
. Wait for the blades to come to a standstill. Risk of injury!
4. Dispose of batteries correctly!
5. Protect the tool from the damp and never
expose it to rain.
General safety instructions for electric tools
The term “electric tool” used in the safety instructions refers to elec-
tric tools operated from the mains power supply (with a power cable)
and to battery operated electric tools (without a power cable).
Anl_PE_AGS_3_6_Li_SPK7.indb 212
Anl_PE_AGS_3_6_Li_SPK7.indb 212
21.08.15 10:23
21.08.15 10:23