EN
160
EN
161
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
1x
9
7
15
5
11
3
2
4
1
1
22
1
2
1x
10
14
6
13
12
8
1x
Product overview
1
Cutting bar
2
Motor housing
3
Sleeve
4
Upper pole
5
Front handle
6
Cutting device cover
7
Battery (not included)
8
Battery release button
9
On/Off switch
10
Main handle
11
Release switch
12
Harness connector
13
Harness
14
Fixing screw
15
Angle adjustment button
Intended use
This garden tool is
– intended for cutting and trimming hedges
and bushes which have maximum branch
thickness of 16 mm;
– designed for maintaining hedges and bush-
es in the private sector,
– to use according to the descriptions and
safety instructions indicated in this operat-
ing manual.
Any other use is not as intended. Improper use
is not covered by the warranty and the manu-
facturer will reject any liability. The user is li-
able for all injuries to third parties and damage
to their property. Operate the unit only in the
technical condition as stipulated and delivered
by the manufacturer. Arbitrary changes to the
unit will exclude the manufacturer from any li-
ability for resulting injury and/or damage.
Adjustments
ATTACH MOTOR HOUSING
Insert the bar
into the motor hous-
ing
, so that the locking pin snaps into
the little hole in the motor housing.
Subsequently, screw the sleeve
firmly against the motor housing.
2
1
2
SET POLE LENGTH
(Release fixing screw
counter-
clockwise. Set the pole
to a suitable
length. Fasten the fixing screw clock-
wise.
Caution!
Loose connections may
cause loss of control and injuries.
1
HARNESS
Attach the harness
to the harness
connector
of the machine.
Caution!
Before performing any
work on the tool, remove the battery.
