EN
88
Declaration of conformity
We declare, that the product
described in
Technical Data
:
200 W
Finishing Sander PFS200G
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
and in accordance to the following applicable
harmonized standards:
EN 6284124:2014
EN 628411:2015+AC:2015
EN 550141:2017
EN 550142:2015
EN 6100032:2014
EN 6100033:2013
Andreas Back
Head of Quality Management, environment
& CSR Person authorised to compile the
technical file
Bornheim, 01.12.2020
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Care & Maintenance
Caution!
Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean. Use
a soft brush to remove any accumulated
dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution!
If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.