EN
144
EN
145
Slide the battery
onto the charger
and check its LEDs:
Red:
Charging
Green:
Battery is fully charged
Flashing Red:
Battery is defective
Flashing Green:
Battery is too hot/ cold
2
ATTACH BATTERY
Slide the charged battery
into the
battery slot on the grass trimmer until
it clicks into place.
SWITCHING ON/ OFF
On:
Press and hold the release switch
and the on/ off switch
Off:
Release the on/ off switch.
Warning!
The line continues run-
ning for a short time after switching
off the grass trimmer.
RELEASE BATTERY
Press the battery release switch
and
pull out the battery
1
1
2
Caution!
Only use the intended bat-
tery with the machine.
REPLACE THE SPOOL
Press both catches together and remove
the cover. Replace the spool
or wind
3 m of 1.65 mm ø cutting line around the
spool in direction of the arrows. Guide
the end of the line outwards.
Reattach the cover and pull on the line
end to release line from the spool.
Note: The knife integrated in the safety
guard
trims the cutting line auto-
matically to the required length.
1
2
ADJUST THE AUXILIARY HANDLE
Press the auxiliary handle locking knob
to rotate the handle
to a comforta-
ble position. Release the locking knob.
ADJUST THE HEIGHT
Unscrew the height adjustment locking
collar
clockwise to adjust the height
of the tube. Tighten the height adjust-
ment locking collar
counter-clockwise
to lock the height.
1
2
CHARGE BATTERY (NOT INCLUDED)
Plug the charger (not included) into a
suitable wall socket.
Caution!
Only use the battery
charger specified in technical data
to charge the battery.
1
1
2
2.
1.
1
1
1
2
2
1
1.
2.
1.
2.
2
1.
2.
1.
2.
