EN
118
EN
119
chisel or accessory.
Accessories may be
hot after prolonged use.
h)
Do not run the tool while carrying it at
your side.
The spinning drill bit may be-
come entangled with clothing and injury
may result.
MACHINE SPECIFIC SAFETY WARNINGS
a)
Only work with tools assembled cor-
rectly.
Check the proper fit of the tool and
its accessories by pulling it.
b)
Make sure that the area beneath the
working height is free.
c)
Check the hammer and its accessories
before every use for rust and damage.
Do not use the hammer, if it is damaged
or deformed.
If you observe a damage,
contact your HORNBACH store.
d)
Reduce dust pollution. While working,
particels occur which could cause can-
cer, allergic reactions, respiratory dis-
eases, birth defects or other reproduc-
tive harm.
Examples: Lead in lead paint,
mineral dust in brick or concrete, asbestos,
metals, wood preservative like chromate or
wood dust from oak or beech. Always wear
hearing protection, protection glasses, pro-
tection gloves, dust mask and safety boots
while working with the hammer to avoid
injuries.
e) Vacuum or wash the safety equipment. Do
not blow, beat or brush off the dirt particles.
RESIDUAL RISKS
Even if you are operating this product in ac-
cordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connection
with the structure and design of this product:
1. Injuries and damage to property due to bro-
ken application tools.
2. Danger of injury and property damage
caused by flying objects.
Declaration of conformity
We declare, that the product
described in
Technical Data
:
1700 W caulking and demolition hammer
PA 1700, PA 1700 CH
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
Outdoor Directive 2000/14/EC and
2005/88 EC
and in accordance to the following applicable
harmonized standards:
EN 60745-1:2009+A11:2010
EN 60745-2-6:2010
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Conformity Assessment Procedure: 2000/14/
EC, amended by 2005/88/EC- Annex VI
Measured Sound Power Level: 103.81 dB(A),
K=1.52 dB(A)
Guaranteed Sound Power Level: 105 dB(A)
Name and address of the notified body:
N°0197
TÜV Rheinland LGA Products GmbH
Tillystrasse 2, 90431 Nürnberg
Germany
Andreas Back
Head of Quality Management, environment
& CSR
Person authorised to compile the technical file
Bornheim, 10.03.2021
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
