EN
87
Set the rear hammer-drill / drill switch
7
to hammer-drill .
2
HAMMER FUNCTION
Set the top hammer-drill / hammer
switch
6
to hammer .
Caution!
Only set operation modes
while the appliance is switched off.
1
HAMMER-DRILL FUNCTION
Set the top hammer-drill / hammer
switch
6
to hammer-drill .
Caution!
Only set operation modes
while the appliance is switched off.
1
Set the rear hammer-drill / drill switch
7
to hammer-drill .
2
DRILL FUNCTION
Set the top hammer-drill / hammer
switch
6
to hammer-drill .
Caution!
Only set operation modes
while the appliance is switched off.
1
Set the rear hammer-drill / drill switch
7
to drill .
2
DEPTH GAUGE
Press the lock button
1
and slide the
depth gauge into the auxiliary handle
4
.
Set the desired clearance of the depth
gauge and release the lock button.
2
1
Caution!
Make sure the tool is
switched off and unplugged.
DUST COVER
Attach the dust cover
to the chisel or
drill.
Use the dust cover
to prevent dust from
falling on you or the tool when perform-
ing overhead drilling-operations.
2
1
Caution!
Make sure the tool is
switched off and unplugged.
