EN
87
SPRAY TECHNIQUE
Hold the gun evenly and steadily at a
distance of approx. 10-30 cm from the
target object.
1
ADJUST SPRAY SETTING
Unscrew the union nut
1
slightly and
turn the air cap
2
to select the spray
settings, aligning it to the markings.
1
vertical fat jet
2
circular jet
3
horizontal fat jet
1
ADJUST MATERIAL VOLUME
Turn the material volume adjustment
8
on the trigger
5
upward for more mate-
rial output.
1
CLEANING
The spray gun can be dismounted for
cleaning. Press the unlock-button
11
and pull out the front part
4
.
1
Turn the material volume adjustment
8
on the trigger
5
downward for less ma-
terial output.
2
Unsteady movements will cause a
heavy spray fog build-up and result in
an uneven surface quality
2
Change the air filter whenever it is
soiled.
2
Unscrew the union nut
1
, remove air
cap
2
, pull out nozzle
3
and clean with
solvent or water.
2
Fill the container
6
with water or sol-
vent (flashpoint over 55° C). Assemble
the gun and spray the content into a
cloth or container until the emerging
liquid is clear.
1
Caution!
Never pull the trigger
guard while adjusting the air cap.
Danger of injury!
Caution!
Never operate the spray
gun without filter!
Caution!
Never immerse the rear
part of the spray gun into liquids.
Only clean with moistened cloth.
Caution!
Make sure the tool is un-
plugged before dismounting and
cleaning.
