EN
139
Intended Use
Product overview
1
Switch-on lock
2
Handlebar
3
Protection shield
4
Cutting bar
5
Impact guard
6
Cable bracket
7
Power supply cord
8
On/Off switch
9
Rear handle
Connecting the tool
Connect the hedge trimmer with an
outdoor extension cord and plug it into
a suitable wall socket.
Note:
Extension cords longer than
30 m reduce the output.
For strain relief: Insert a loop of
the extension cord through the
cable bracket
6
.
1
2
This garden tool is
– intended for cutting and trimming hedges
and bushes which have a maximum branch
thickness of -24 mm;
– designed for maintaining hedges and bush-
es in the private sector,
– not suitable for work above shoulder height,
– to use according to the descriptions and
safety instructions indicated in this operat-
ing manual.
Any other use is not as intended. Improper use
is not covered by the warranty and the manu-
facturer will reject any liability. The user is li-
able for all injuries to third parties and damage
to their property.
Operate the unit only in the technical condition
as stipulated and delivered by the manufac-
turer.
Arbitrary changes to the unit will exclude the
manufacturer from any liability for resulting
injury and/or damage.
3
6
4
7
8
1
5
9
2
1
2
