EN
87
CHANGING SANDING BELT
Remove cover screw
6
and belt hous-
ing cover
7
.
1
Release slide lock
3
and slip off the old
sanding belt.
2
CHANGING SANDING ARM
Remove the sanding belt
9
, unscrew
the belt adjustment knob
2
and remove
the sanding arm
1
.
SANDING ARM ANGLE
Loosen the angle adjusting knob
14
and adjust the sanding arm
1
to the de-
sired angle for sanding .
BELT SPEED
Select the belt speed with the speed
adjustment thumbwheel
13
.
1
1
1
Mount the new sanding arm, mount
the sanding belt
9
and adjust the belt
tracking.
2
Tighten the angle adjustment knob
14
firmly.
2
BELT TRACKING
Turn the belt adjustment knob
2
to
center the sanding belt
9
on the sand-
ing arm
1
.
2
Warning!
Make sure the tool is
switched off and unplugged.
Warning!
Make sure the tool is
switched off and unplugged.
Warning!
Make sure the tool is
switched off and unplugged.
Warning!
Make sure the tool is
switched off and unplugged.
Place the new sanding belt over spindle
(1.) and roller (2.) of the sanding arm
1
.
3
Observe the arrows on tool and
sanding belt for correct assembly.
Do not use the same sanding paper
for metal and wood.
Tighten slide lock
3
and replace belt
housing cover
7
and cover screw
6
.
4
Warning!
Make sure the sanding
arm points away from the handle.
Summary of Contents for Powerfile PE-500PF
