EN
124
EN
125
Technical Data
Nominal voltage
220 - 240V~ 50/60 Hz
Rated power
900 W
No-load speed (n
0
)
16000/min
Max. planing depth
3 mm
Max. planing width
82 mm
Max. rabbeting depth
16 mm
Weight
3.4 kg
Protection Class
/ II
Sound pressure level (L
pA
)
91.4 dB(A) / Uncertainty K = 3 dB(A)
Sound power level (L
wA
)
102.4 dB(A) / Uncertainty K = 3 dB(A)
Max. vibration emission (a
h
)
4.784 m/s
2
/ Uncertainty K = 1.5 m/s
2
Noise & Vibration
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard
test method (EN 62841-2-14:2015) and may
be used for comparing one tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
Caution!
The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
It is necessary to identify safety measures to
protect the operator that are based on an es-
timation of exposure in the actual conditions
of use (taking account of all parts of the op-
erating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
Care & Maintenance
Dust collection system
Use of dust collection can reduce dust-related
hazards.
To prevent personal injuries, make sure to
connect a suitable vacuum cleaner or the col-
lecting bag
to the chip extraction port. The
port is capable of a connector of 35 mm.
Replacement Parts
Warning!
Replacement parts must
conform with the requirements spec-
ified by the manufacturer. Therefore use
original replacement parts only or spare
parts authorised by the manufacturer.
In case of service requests or spare parts,
please contact your local HORNBACH store or
write an email to: service@hornbach.com
Caution!
Make sure the tool is
switched off and unplugged.
- Clean the chip extraction ports regularly. To
clean a clogged chip extraction port, use a
suitable tool, e.g. a piece of wood or com-
pressed air.
- Never introduce your hand into the chip
extraction port. Rotating parts could cause
serious injuries.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Store unused equipment in a dry, locked
place out of the reach of children.
Caution!
If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.
