15
16
In the connected position, this strap links DB-15 pin 1 & frame
ground. In the open position, pin 1 is disconnected from frame ground.
JB3
Position 1&2 = DTE Shield (Pin 1) and FRGND Connected
Position 2&3 = DTE Shield (Pin 1) and FRGND Not Connected
SGND & FRGND (JB4)
In the connected position, this strap links DB-15 pin 8 (Signal
Ground) and frame ground through a 100 ohm resistor. In the open
position, pin 8 is connected directly to frame ground.
JB4
Position 1&2 = SGND (Pin 8) and FRGND Connected through
a 100 ohm resistor
Position 2&3 = SGND (Pin 8) and FRGND Directly Connected
3.2.4 Model 1001RCM11575 Strap Settings
Figure 8 shows strap locations for the Model 1001RCM11575 (DB-
15/Dual BNC) rear cards. Figure 8 shows strap locations for the Model
1001RCM11548C (DB-15) rear cards. These straps determine various
grounding characteristics for the terminal interface and twisted pair
lines. JB3 and JB4 are user configurable.
SGND & FRGND (JB4)
In the connected position, this strap links Signal Ground and frame
ground through a 100 ohm resistor. In the open position, signal ground
is disconnected from frame ground.
JB4
Position 1&2 = SGND and FRGND Connected
Position 2&3 = SGND and FRGND Not Connected
3.2.3 Model 1001RCM11548C Strap Settings
Figure 7 shows strap locations for the Model 1001RCM11548C
(DB-15) rear cards. These straps determine various grounding charac-
teristics for the terminal interface and twisted pair lines. JB3 and JB4
are user configurable.
The table below provides an overview of interface strap functions
for the rear interface cards. Following the table overview are detailed
descriptions of each strap’s function.
DTE Shield (DB-15 Pin 1) & FRGND (JB3)
1 2 3
JB3
JB4
1 2 3
Figure 7.
1001RCM11548C strap locations
INTERFACE CARD STRAP SUMMARY TABLE #3
Strap
Function
Position 1&2
Position 2&3
JB3
DTE Shield (Pin1) & FRGND
Connected*
Open
JB4
FRGND & SGND (Pin 8)
Connected*
Open
* Indicates default setting
Figure 8.
1001RCM11575 strap locations
INTERFACE CARD STRAP SUMMARY TABLE #3
Strap
Function
Position 1&2
Position 2&3
JB3
DTE Shield (Pin1) & FRGND
Connected*
Open
JB4
FRGND & SGND (Pin 8)
Connected*
Open
* Indicates default setting
JB4 JB3
