background image

USER

MANUAL

MODEL 2703RC

MegaLink-1™ 

G.703/E1

Digital Modem:
Rack Mount Card

SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com

Part# 07M2703RC-C
Doc# 031121UC
Revised 10/12/98

Dear Valued Customer,

Thank you for purchasing Patton Electronics products!   We do

appreciate your business.  I trust that you find this user manual helpful.  

We manufacture one of the widest selections of data communica-

tions products in the world including CSU/DSU's, network termination units,
powered and self-powered short range modems, fiber optic modems, interface
converters, baluns, electronic data switches, data-line surge protectors, multi-
plexers, transceivers, hubs, print servers and much more.  We produce these
products at our Gaithersburg, MD, USA, facility, and can custom manufacture
products for your unique needs.

We would like to hear from you.  Please contact us in any of the fol-

lowing ways to tell us how you like this product and how we can meet your
product needs today and in the future.  

Web:

http://www.patton.com

Sales E-mail:

sales@patton.com

Support E-mail:

support@patton.com

Phone - Sales       (301) 975-1000
Phone - Support  

(301) 975-1007

Fax:

(301) 869-9293

Mail:

Patton Electronics Company
7622 Rickenbacker Drive
Gaithersburg, MD  20879   USA

We are committed to a quality product at a quality price.  Patton

Electronics is BABT and ISO 9001 certified.  We meet and exceed the highest
standards in the industry (CE, UL, etc.).

It is our business to serve you.  If you are not  satisfied with any

aspect of this product or the service provided from Patton Electronics or its
distributors, please let us know.  

Thank you.

Burton A.Patton
Vice President

P.S.  Please tell us where you purchased this product.

_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________

An ISO-9001

Certified Company

Summary of Contents for 2703RC













Reviews: