Rear and Front Panels
18
IpLink 2888 Getting Started Guide
1 • General information
IpLink 2888 front panel
Figure 3
shows IpLink 2888 LEDs, the LED definitions are listed in
table 4
.
Figure 3. IpLink 2888 front panel
Table 4. LED Descriptions
LED
Description
Note
If an error occurs, all LEDs will flash once per second.
Power
When lit, indicates power is applied.
Run
When lit, the unit is in normal operation. Flashes once per second during
boot (startup).
Ethernet Link
On when the Ethernet connection on the corresponding port has a link indication.
Ethernet Speed
10/100
When the Ethernet Link LED is on, then:
•
On when the Ethernet is connected to a 100Mb network.
•
Off when the Ethernet is connected to a 10Mb network.
Ethernet Speed
1000
On when the Ethernet is connected to a 1000Mb network.
Ethernet Activity
•
Flashes when data is received or transmitted at the corresponding Ethernet port.
T1/E1 Link/Status
•
On = in frame, no errors
•
Flash = Error
•
Fast Flash = Signal detected but no frame synchronization or aquisition is in
process
•
Slow Flash = Framing synchronized, Signaling not established
Power
Activity
Ethernet 0
Link
Ethernet 0
100
Ethernet 0
1000
Ethernet 0
Activity
Ethernet 1
Link
Ethernet 1
100
Ethernet 1
1000
Ethernet 1
Activity
Port 1
Port 2
Port 3
Port 0
T1/E1 Port 0
Port 1
Port 0
Model 2888 IpLink
Model 2888 IpLink
Multi-Megabit Inverse Muxx
Port 2 Port 3
T1/E1 Port 1
T1/E1 Port 2
T1/E1 Port 3
