Introduction
42
IpLink 2888 Getting Started Guide
C • Cabling
Introduction
This section provides information on the cables used to connect the IpLink and the interface cards to the exist-
ing network infrastructure and to third party products.
Console
The IpLink can be connected to a serial terminal over its serial console port, as depicted in
figure 12
.
Figure 12. Connecting a serial terminal
Note
See section
“Console port”
on page 47 for console port pin-outs.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each IpLink 288x device
