2. Operation of the 3028
Turbo
Multiplexer
154001UA
2-7
MONITOR MODE
REV 938 14.0
2 0 3 1 2 -3
2 0 3 1 2 -5 3
EVENT @ 10:00:00
CHNL 1 RESET
2 0 3 1 2 -5 4
R EVT @ 10:00:00
CHNL 1 RESET
Figure 2-3. Local Event Display
Figure 2-3. Local Event Display
Figure 2-3. Local Event Display
Figure 2-3. Local Event Display
Figure 2-3. Local Event Display
Figure 2-4. Remote Event Display
Figure 2-4. Remote Event Display
Figure 2-4. Remote Event Display
Figure 2-4. Remote Event Display
Figure 2-4. Remote Event Display
Note
The multiplexer uses a 24-hour clock for
time displays and does not have the date
maintained as part of the time stamp.
Queued messages are deleted when the
system clock goes from 23:59:59 to
00:00:00.
To enter
STANDBY
mode:
PRESS:
MON/CLR
To enter
COMMAND
mode:
PRESS:
NEXT
Terminal Access
To enter
MONITOR
mode from the terminal main menu:
TYPE:
22
PRESS:
RETURN
The terminal indicates that
MONITOR
mode is entered with a screen display:
When an event occurs (Figure 2-5) it is displayed on the terminal:
MONITOR MODE
EVENT @ 10:00:00 event
REMOTE EVENT @ 10:00:00 event
2 0 3 1 2 -4
Figure 2-5. Event Messages
Figure 2-5. Event Messages
Figure 2-5. Event Messages
Figure 2-5. Event Messages
Figure 2-5. Event Messages
