2. Operation of the 3028
Turbo
Multiplexer
154001UA
2-35
The terminal displays:
TYPE:
n (n = the echoplex option number)
PRESS:
RETURN
The multiplexer updates the channel echoplex and returns the
CHANNEL
PARAMETERS
menu. If the
RETURN
key is pressed without entering an
echoplex option, the Main Menu is returned.
2 0 3 1 2 -1 9
(ENTER 1-2 <CR> TO CHANGE. <CR> TO RETAIN OLD SETTING.):
CHANNEL n ECHOPLEX: CURRENTLY: NO
1:
2:
YES
NO
Channel Flyback Buffering
Channel Flyback Buffering
Channel Flyback Buffering
Channel Flyback Buffering
Channel Flyback Buffering
The
FLYBACK BUFFERING
parameter causes detection and regeneration at
the remote end of any delay encountered after reception of characters which
cause print-heads to "flyback" to the beginning of a line. If selected, the delay is
regenerated after the ASCII characters: Carriage Return, Line Feed, Form Feed,
Horizontal Tab, and Vertical Tab.
Front Panel Access
From the
COMMAND MODE
display
PRESS:
NEXT or LAST
until
CHNL PARAMETERS
displays on the second line
PRESS:
SELECT
PRESS:
NEXT or LAST
to choose a channel number
PRESS:
SELECT
PRESS:
NEXT or LAST
until
CHNL n FLYBACK
displays on the second line
PRESS:
SELECT
the LCD displays:
2 03 12 -7 3
CHNL n FLYBACK
Where
is
NO
YES
PRESS:
NEXT or LAST
until the desired option displays
PRESS:
SELECT
