Installing the Model 3034/3038
27
Model 3034/3038 Getting Started Guide
3 • Model 3034/3038 installation
Internal AC Power Supply.
1.
Connect the AC power cord female plug directly to the AC connector.
2.
Connect the AC power cord male plug to an AC power outlet (120–240 VAC).
The
Power
LED blinks as the unit is powering up. When the
Power
LED stops blinking and remains lit, the
unit is ready for user configuration. (See
figure 3
on page 18).
External AC Power Supply.
An LPS 120/240V AC to 5VDC adapter is supplied with the EUI version of the Model 3034/3038.
1.
The female plug on the AC power cord plugs into the male AC connector on the adapter.
2.
Connect the AC power cord male plug to an AC power outlet (120–240 VAC).
The
Power
LED blinks as the unit is powering up. When the
Power
LED stops blinking and remains lit, the
unit is ready for user configuration. (See
figure 3
on page 18).
•
Do not connect power to the AC Mains at this time.
•
There are no user-serviceable parts in the power supply sec
tion of the Model 3034/3038. Contact Patton Electronics
Technical support at (301)975-1007, via our web site at
http://www.patton.com, or by e-mail at support@patton.com,
for more information.
•
The internal power supply automatically adjusts to accept an
input voltage from 100 to 240 VAC (50/60 Hz).
Verify that the proper voltage is present before plugging the
power cord into the receptacle. Failure to do so could result in
equipment damage.
•
Do not connect power to the AC Mains at this time.
•
The external power adapter shall be a listed Limited Power
Source.
•
There are no user-serviceable parts in the power supply sec
tion of the Model 3034/3038. Contact Patton Electronics
Technical support at (301)975-1007, via our web site at
http://www.patton.com, or by e-mail at support@patton.com,
for more information.
•
The 3034/3038 external power supply automatically adjusts
to accept an input voltage from 100 to 240 VAC (50/60 Hz).
Verify that the proper voltage is present before plugging the
power cord into the receptacle. Failure to do so could result in
equipment damage.
WARNING
CAUTION
WARNING
