Configuring Clocking Synchronization
33
FS6300 NMS Getting Started Guide
3 • Configuring Alarms and Clocking
Configuring Clocking Synchronization
To configure clocking synchronization for a chassis:
1.
From the menu tree on the left side of the screen, select
Node
(under Geographical Area).
2.
In the main window, right-click on the chassis that you want to configure clocking for.
3.
Select
Chassis Clocking Synchronization
from the pull-down menu.
Figure 13. Chassis Menu > Chassis Clocking Sync
The
Chassis Clocking Synchronization
window displays.
Figure 14. Modify System Clocking
4.
Select
Modify System Clocking
from the menu tree on the left side of the screen.
5.
Select a card from the
Select Card
drop-down menu, and select a clock from the
Clock Reference
drop-
down menu. The Clock Reference
can be
Master(1)
,
Secondary(2)
, or
Slave(3)
. Click
Submit
.
6.
Repeat Step 5 for each card in the chassis.
Note
A chassis can have only one master and one secondary, so if you accidentally
select another master in the same chassis, the NMS will not allow you to save
the clock for that card as the Master.
