Configuring the Card System
79
FS6300 NMS Getting Started Guide
7 • Configuring the 6511RC Card
Figure 63. Modify 6511RC Card System Parameters
1.
Enter the country where the card is located in the
Country
text field.
2.
Enter a description for the card in the
Module Name
text field.
3.
Select to enable or disable graphics from the
Web Settings
drop-down menu.
4.
Select a privilege option from the
Monitor Privilege
drop-down menu.
5.
Select how often you would like to refresh statistics information from the
Stats Refresh Rate
drop-down
menu.
6.
Select to enable or disable front handle information from the
Front Handle Reset
drop-down menu.
7.
Click
Modify
to save your changes. Click
Refresh
.
View System Status
Click on
View System Status
in the Card System Configuration window to see an overview of the physical sta-
tus of the card and the system status.
View System Status
shows information about the handle switches, front/
rear LEDs, alarm and clock LEDs, and the board temperature.
View System Status Details
Click on
View System Status Details
in the Card System Configuration window to see information on CPU
statistics, Message Block statistics, Memory statistics, Manufacturer details, and the Enclosure System temper-
ature.
View Ethernet Status
Click on
View Ethernet Status
in the Card System Configuration window to see the LEDs and speeds of the
card’s Ethernet ports.
