Managing Maps
74
FS6300 NMS Administrator’s Reference Guide
4 • Configuring Maps
5.
Select which ports to use on the device from the
Dev Num A
and
Dev Num B
drop-down menus.
Select the orange square icon
to view available ports. A pop-up window will display.
6.
Enter the range of time slots to use on the card in the
Dev Slots A
and
Dev Slots B
text fields.
7.
Enter a
Circuit ID
for the map.
8.
Click
Define
.
9.
The new map will be added to the table in the
View-Delete Maps
section.
Creating Inter Card Maps
To create maps between cards in the same chassis:
1.
Click on
Inter Card
in the menu tree of the Map Provisioning window.
Figure 61. Inter Card window
2.
Select a chassis from the
Select Chassis
drop-down menu. If the selected chassis is type
6U
, select the right
or left segment from the drop-down menu in the blue section at the top of the window.
3.
Select a card in the chassis where you want to start the mapping in the
Select Card
drop-down menu in the
Source Card
section (left side) of the window.
4.
Select a port type for the source card from the
Port Type
drop-down menu.
