Modem Information page MIB variables description
101
Model 1001MC Operations Guide
6 • Model 1095RC management
Starting from the
HOME
page, to access the
Download
page for the 1095RC, click on the
Download
link.
Figure 51
shows the web page navigation required to get to this area of the system.
Figure 51. Web page navigation to Download page
For more information about items on the
Download
page, see
“Using the Download page to upgrade 1095RC
software”
on page 111.
Modem Information page MIB variables description
This section describes the MIB variables that are available on the
Modem Information
page.
Slots Available (totalConfigSlots)
Displays the number of configurable slots available in the rack.
Modems Installed (rackXCardsInstalled)
Displays the number of modem cards installed in the rack that the system has found.
Number of Power Supplies (rackXPowerSupplies)
This is where you specify the number of power supplies installed in the rack (this value determines the addressing
range for the rack). In the case of a redundant power supply system, you should set this variable to 2, this will
inform the Model 1001MC that there should be 2 power supplies in the system.
Rack Protection Mode
If you want to protect all Model 1095RC rack cards installed in the current rack from being globally config-
ured, select
protected(1)
from the pop-up menu, then click the
Submit
button. For more information about the
system configuration feature, refer to section
“System Config”
on page 259.
