Model 1095 Configuration Slot page MIB variables description
105
Model 1001MC Operations Guide
6 • Model 1095RC management
Line Status (lineStatus1095)
Displays the status of the line. There are three possible values that can be displayed:
•
startup(1)
•
dataMode(2)
•
testMode(3)
When the line status is dataMode(2), the units are linked-up and ready to send data.
Processor Mode (processorMode1095)
Displays the status of the processor running on the NetLink-mDSL. There are four values that are significant to
you:
•
normal(0)—When the processor is in normal(0) mode, the NetLink mDSL modem is monitoring itself
and sending the status information to the Model 1001MC
•
internalProcessing(1)—When the processor is in the internalProcessing(1) mode, it is either busy down-
loading code to the internal DSP or setting the data pump.
•
negotiating(2)—When the processor is in the negotiating(2) mode, the card was just brought online and
the NetLink-mDSL is setting up the configuration parameters within the Model 1001MC
•
lineDown(3)
At startup, all of the fields will be highlighted in yellow, signifying that they are
not
verified parameters. As the
NetLink-mDSL sets up the parameters, the highlighting disappears, signifying that the display matches the set-
ting of the card.
Previous Card button
Click the
Previous Card
button to display the rack card configuration in the next occupied slot (in descend-
ing order).
Note
Clicking on the
Previous Card
button before you have clicked the
Submit
button to save any changes will delete those changes.
Refresh Current Page button
Clicking the
Refresh Current Page
button displays updated configuration information.
Next Card button
Click the
Next Card
button to display the rack card configuration in the next occupied slot (in descending
order).
Note
Clicking on the
Next Card
button before you have clicked the
Sub-
mit
button to save any changes will delete those changes.
View Rack X hyperlink
Click on this link to display the
Modem Information Rack
X
page. The
Modem Information Rack
page displays
an overview of the NetLink rack that is being managed. For more information, refer to section
“Modem Informa-
tion Rack X”
on page 239.
