Creating and modifying global configuration templates
113
Model 1001MC Operations Guide
6 • Model 1095RC management
Creating and modifying global configuration templates
Model 1095RC rack cards can be configured globally by templates you create. If you use this capability, you
have the option to globally configure some or all Model 1095RC modems in multiple racks, or those in just
one rack.
Note
Due to the many different applications that are supported, care must
be taken when setting the configuration of your modems that you
avoid using combinations of variables that could cause problems with
the modems if implemented incorrectly. Those variable combinations
(referred to as
illegal combinations
) are described in this chapter.
This section contains the following information to help you configure and use templates:
•
Protecting individual Model 1001 racks and 1095RC rack cards from global modification—You may not
want all racks or modems to be modified when you apply the global template, so section
“Protecting Model
1001 racks and Model 1095RC modems from global modification”
describes how to protect individual
1001 racks and 1095RC modems from being globally configured.
•
Creating a template (see section
“Creating a template”
on page 117)
•
Modifying a template (see section
“Modifying a template”
on page 121)
•
Deleting a template (see section
“”
on page 125)
•
Applying a template (see section
Protecting Model 1001 racks and Model 1095RC modems from global modification
This section describes how to protect 1001 racks and 1095RC modem cards from being modified when a glo-
bal modification is applied. This is useful if you are setting all but a few cards to the same configuration.
Select the appropriate option from following configuration choices:
•
Protect a Model 1001 rack (see section
“Protecting a Model 1001 rack from global configuration”
on
page 114)
•
Protect a Model 1095RC rack card (see section
“Protecting a Model 1095RC rack card from global config-
uration”
on page 116)
