Model 2701RC Configuration Slot X page MIB variables description
145
Model 1001MC Operations Guide
7 • Model 2701RC management
AIS (aisAlarm)
Displays the number of times an Alarm Indication Signal on the E1 line is detected. This should be set when
an unframed all ones code is received at RPOSI and RNEGI. This number is accumulating in the 1001MC.
Note
Alarm counters severity level is controlled by the “Line Down Indica-
tion” level. The following options are available:
•
none
—Only Syslog message will be sent
•
warning
—Syslog message will be sent beginning with “box\box.c:
Warning:” and web page warning counter will be incremented
•
error
—Syslog message will be sent beginning with “box\box.c:
Error:”, the web page error counter will be incremented, and an
SNMP trap message will be sent
Flap Count (lineDownCnt)
Displays the number of times the E1 line has been up and then becomes down. This should be set when the E1
line is up and becomes down. This number is accumulating in the 1001MC.
Note
Alarm counters severity level is controlled by the “Line Down Indica-
tion” level. The following options are available:
•
none
—Only Syslog message will be sent
•
warning
—Syslog message will be sent beginning with “box\box.c:
Warning:” and web page warning counter will be incremented
•
error
—Syslog message will be sent beginning with “box\box.c:
Error:”, the web page error counter will be incremented, and an
SNMP trap message will be sent
CRC4 Error (crc4Error)
Displays the number of CRC4 errors received by the E1 interface. This is an error counter that records word
errors in the CRC4. The counter is disabled during loss of sync. This number is accumulating in the
1001MC.
Note
Alarm counters severity level is controlled by the “Line Down Indica-
tion” level. The following options are available:
•
none
—Only Syslog message will be sent
•
warning
—Syslog message will be sent beginning with “box\box.c:
Warning:” and web page warning counter will be incremented
•
error
—Syslog message will be sent beginning with “box\box.c:
Error:”, the web page error counter will be incremented, and an
SNMP trap message will be sent
The Clear Counter button
This button clears all alarm counters.
