Creating and modifying global configuration templates
164
Model 1001MC Operations Guide
7 • Model 2701RC management
Figure 80. Model 2701RC Global Configuration page
2.
Change the parameters requiring modification (see
figure 80
). When you have finished changing the con-
figuration, click on the
Submit
button to save the changes.
Refer to section
“Applying a template”
on page 164 to activate the template.
Deleting a template
Do the following to delete a template:
Note
When a template configuration is deleted, it cannot be recovered.
1.
Select a template from the
Delete Configuration
pop-up menu (see
figure 79
on page 163).
2.
Click the
Delete Configuration
button.
Applying a template
This section describes how to apply a global configuration to all Model 2701RC rack cards. Model 2701RC
cards which will not be configured to the selected Global Configuration are:
•
Those installed in a Model 1001 rack that has the entire rack set to be protected(1)
•
Those that are individually set to protected(1) mode
Instructions for protecting either an entire rack or individual 2701RC cards are given earlier in this chapter.
