Modem Information Rack X
239
Model 1001MC Operations Guide
10 • HTTP/HTML web page reference
Modem Information Rack
X
The
Modem Information Rack
X
page displays an overview of the NetLink rack that is being managed. This page will
display statistical information, such as errors and warnings on a per-card basis, and identification information, such
as model codes and user IDs.
Figure 117
shows the
Modem Information
page, a description of each variable follows.
Figure 117. Modem Information page
Slots Available (totalConfigSlots)
Displays the number of configurable slots available in the rack.
Modems Installed (rackXCardsInstalled)
Displays the number of modem cards installed in the rack that the system has found.
Number of Power Supplies (rackXPowerSupplies)
This is where you specify the number of power supplies installed in the rack (this value determines the addressing
range for the rack). In the case of a redundant power supply system, you should set this variable to 2, this will
inform the Model 1001MC that there should be 2 power supplies in the system.
Note
The 1001MC does not automatically detect the number of installed
power supplies. It must be configured here.
