Modem Information Rack X
241
Model 1001MC Operations Guide
10 • HTTP/HTML web page reference
Line Status
The line status column on each
View Rack
page shows the current line status of each card. Keep in mind that
the more cards the 1001MC is managing, the longer it will take for the line status field to update. Displays the
status of the line. The following values can be displayed:
•
startup(1)
•
dataMode(2)—When the line status is dataMode(2), the units are linked-up and ready to send data.
•
testMode(3)
Warnings (warningCount)
Displays the warnings that are associated with each modem installed in the system. When warnings are present,
this field will be highlighted in yellow and the number of warnings will be listed. For more information on the
cause of the warning, you should view the
System Log
. Warnings will be highlighted in yellow in the log. The
warnings for the slot can be erased in the Slot Configuration page (see section
“Slot Configuration”
on
page 243 for more information).
Note
The
System Log
will still display the warnings even after the number
is cleared.
Errors (errorCount)
Displays the errors that are associated with each modem installed in the system. When errors are present, this field
will be highlighted in red and the number of errors will be listed. For more information on the cause of the error,
you should view the System Log. Errors will be highlighted in red in the log. The errors for the slot can be erased
in the Slot Configuration page (see section
“Slot Configuration”
on page 243 for more information).
Note
The System Log will still display the errors even after the number
is cleared.
Local User Id (localUserID)
User supplied string that defines the NetLink modem installed in the rack. The string is stored in non-volatile
flash within the NetLink modem. If the address of the modem is changed, the User ID will move to the new
slot. The string can be up to 10 bytes long and can be changed or reset within the
Slot Configuration
page (see
section
“Slot Configuration”
on page 243 for more information).
Local Model Code (localModelCode)
This column displays the model code of the NetLink modem installed at the specified address. The Model
Code is also a hyperlink into the configuration of the NetLink modem and its remote unit. The string can be
up to 10 bytes long and can be changed or reset within the
Slot Configuration
page (see section
“Slot Configu-
ration”
on page 243 for more information)
Remote User Id (remoteUserID)
User supplied string that defines the unit at the end of the link. The string is stored in non-volatile flash within
the unit. If the unit is moved, the User ID will move to the new slot. The string can be up to 10 bytes long and
can be changed or reset within the
Slot Configuration
page (see section
“Slot Configuration”
on page 243 for
more information).
