1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support:
tel:
(301) 975-1007
email: support@patton.com
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1095RC. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
3
IMPORTANT:
The Model 1095RC is equipped with flash
upgrade. Please refer to Patton website, or contact Technical
Support for the latest version of the software.
NOTE:
Packages received without an RMA number will not be
accepted.
22..00
G
GEEN
NEER
RA
ALL
IIN
NFFO
OR
RM
MA
ATTIIO
ON
N
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions arise during installa-
tion or use of this product, please contact Patton Electronics Technical
Support at: (301) 975-1007.
2.1 FEATURES
• DSL Distances on just two wires using mDSL technology
• DTE Speeds 64kbps to 2.3 Mbps
• 2-wire Operation
• Fits in Patton’s 2U Rackmount Chassis
• NetLink Plug-and-Play Master Capable
• SNMP Network Management with In-Band Management of Remote
Units plus Advanced Diagnostics & Statistics using Patton Model
1000MC
• Internal, external or receive recovered clocking options
• LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS
2.2 DESCRIPTION
The Patton Electronics
NetLink
TM
mDSL Model 1095RC Multi-
Rate DSL Modem provides high speed 2-wire connectivity to ISPs,
PTTs, and corporations using mDSL (Multi-rate Digital Subscriber Line)
technology. Multi-rate DSL offers the ability to deliver the maximum bit
rate that a twisted pair line can accommodate. Supporting
multiple line
rates from 144kbps to 2.320Mbps, the NetLink provides “megabit”
speeds to leased line, LAN to LAN interconnection, and WAN access
networks over 3.6 miles/5.8km (1.054Mbps on 24AWG/.5mm wire).
The
NetLink
TM
mDSL rack card allows DTE speeds from 64kbps
to 2.3Mbps in increments of 64kbps. Features include loopback diag-
nostics, out-of-band SNMP/HTTP remote management capabilities,
using Model 1000MC, and externally accessible configuration switch-
es.
As a symmetric DSL NTU,
NetLink
TM
mDSL offers the same data
rates in both directions over a single pair of regular telephone lines
using Carrierless Amplitude and Phase (CAP) modulation. The Model
1095RC is designed to fit into Patton’s 2U (3.5”) high rack chassis.
This chassis uses a mid-plane architecture allowing front cards to be
plugged into different rear cards. Please see the Model 1001RP14
manual for more information on the power supply options that are
available.
The NetLink Plug-and-Play feature allows the user to configure the
DTE rate for the link from the rack card at the Central Office. The
stand alone unit at the Customer Premise site will automatically config-
ure itself to the DTE rate of the rack card. Other configuration parame-
ters fall to the default state. This allows changes in the configuration
to be handled from a single end of the link.
4
