3.3.2 Model 1001RCM13445 & 1001RCM134TB Strap Settings
Figure 8 shows the strap location for the Model 1001RCM134XX
(M/34) rear card. This strap determines whether Signal Ground and
Frame Ground will be connected.
The table below provides an overview of interface strap functions
for the rear interface cards. Following the table overview are detailed
descriptions of each strap’s function.
DTE Shield (M/34 Pin A) & FRGND (JB3)
In the connected position, this strap links M/34 pin A & frame
ground. In the open position, pin A is disconnected from frame
ground.
JB3
Position 1&2 = DTE Shield (Pin A) and FRGND Connected
Position 2&3 = DTE Shield (Pin A) and FRGND Not Connected
The table below provides an overview of interface strap functions
for the rear interface cards. Following the table overview are detailed
descriptions of each strap’s function.
DTE Shield (DB-25 Pin 1) & FRGND (JB3)
In the connected position, this strap links DB-25 pin 1 & frame
ground. In the open position, pin 1 is disconnected from frame ground.
JB3
Position 1&2 = DTE Shield (Pin 1) and FRGND Connected
Position 2&3 = DTE Shield (Pin 1) and FRGND Not Connected
SGND & FRGND (JB4)
In the connected position, this strap links DB-25 pin 7 (Signal
Ground) and frame ground through a 100 ohm resistor. In the open
position, pin 7 is connected directly to frame ground.
JB4
Position 1&2 = SGND (Pin 7) and FRGND Connected through
a 100 ohm resistor
Position 2&3 = SGND (Pin 7) and FRGND Directly Connected
15
1 2 3
1 2 3
JB3
JB4
Figure 8. 1001RCM134XX strap locations
INTERFACE CARD STRAP SUMMARY TABLE #2
Strap
Function
Position 1&2 Position 2&3
JB3 DTE Shield (Pin A) & FRGND Connected
Open*
JB4
FRGND & SGND (Pin B)
Connected
Open*
* Indicates default setting
16
INTERFACE CARD STRAP SUMMARY TABLE #1
Strap
Function
Position 1&2 Position 2&3
JB3
DTE Shield (Pin1) & FRGND
Connected
Open*
JB4
FRGND & SGND
Connected
Open*
* Indicates default setting
