Patton’s SmartNode 2300 Modular VoIP Access Router creates a flexible enterprise solution
for easy integration of voice and data. Scalable, intelligent, and multi-service, the SmartNode 2300 supports up
to 60 simultaneous calls and is equipped with a Sync. Serial router with QoS, NAT, and Firewall.
Complete Service Transparency
Using ISoIP™ and ToIP™ technology, calls are connected
with voice, data, and supplementary services delivered
transparently end-to-end.
H.323v3 and H.323+ VoIP
Connect to any SmartNode or VoIP capable device with universal
call control signalling. Use advanced features including H.245
Fast Connect, Early Start, Annex M3, ECS support, and RAS.
V.35/X.21 Router with Dual Ethernet
Connect your LAN to any broadband access network with its
built-in sync. serial router. Use NAT, DHCP, and ACLs while
guaranteeing voice priority and service quality.
T1/E1, BRI, & FXS Voice Interface Cards
Use any combination of voice interfaces for connection to
any telephone, switch, or service provider. Scale your con-
nections by simply adding new interfaces.
Up to 60 Simultaneous Calls
Supports up to 60 simultaenous calls from any combination
of voice intefaces including T1/E1 PRI, BRI, and FXS.
SMARTNODE 2300 SERIES
he SmartNode 2300 Modular VoIP Access Router is a single flexible
platform for network data and Voice-over-IP applications. Ideal for
the branch office or the small to medium enterprise, the SmartNode
2300 is performance-tuned for packet and voice. Equipped with
dual Ethernet ports, a serial V.35/X.21 port, and three voice interface slots, the
SmartNode 2300 scales up to 60 simultaneous calls in a 1U chassis.
The SmartNode 2300 connects your LAN to the WAN using PPP or Frame
Relay (RFC-1490) eliminating the need for and cost of an extra router. With dual
Ethernet ports and built-in QoS, NAT, DHCP, PPPoE, and ACL/Firewall, the
SmartNode 2300 provides complete LAN network access control.
With Patton’s Telephony-over-IP (ToIP) programmable circuit-switching the
SmartNode links any standard BRI, T1/E1 PRI, or FXS connection to the IP
network. Supporting multiple codecs and T.38/Modem bypass, the SmartNode
seamlessly converges voice, data, and fax over IP.
The SmartNode delivers IP network access with the clarity of toll-quality voice
for a complete LAN, WAN, and Gateway solution. For more information, visit
us at
www.patton.com
.
T
Modular VoIP Access Router
Patton SmartNode 2300
VoIP—ToIP
Compatible CODECs
Connect to any gateway with any one of our standard codecs
(including G.711 and G.726). For low bandwidth require-
ments, use G.723.1 and G.729ab vocoders.
