2
About this guide
This guide describes the SIPxNano hardware, installation and basic configuration.
Audience
This guide is intended for the following users:
•
Operators
•
System administrators
•
Network engineers
Structure
This guide contains the following chapters and appendices:
•
Chapter 1,
“General Introduction”
on page 6 provides information about hardware and factory defaults.
•
Chapter 2,
“Setting Up the SIPxNano”
on page 9 contains information on setting up the SIPxNano.
•
Chapter 3,
“Users”
on page 14 explains how to set up users and user groups.
•
Chapter 4,
“Devices”
on page 25 provides information on setting up devices.
•
Chapter 5,
“Features”
on page 40 contains an overview of setting up and configuring features.
•
Chapter 6,
“System”
on page 56 contains information about system settings.
•
Chapter 7,
“Diagnostics”
on page 73 explains diagnostic functions.
•
Chapter 8,
“Voicemail”
on page 78 provides information about using voicemail.
•
Chapter 9,
“Contacting Patton for assistance”
on page 83 contains information on how to contact Patton
for assistance with the SIPxNano.
•
Appendix A,
“Session Initiation Protocol (SIP)”
on page 86 contains an overview of SIP.
•
Appendix B,
“Firewalls and NAT”
on page 95 provides information on firewalls and NAT.
•
Appendix C,
“Configuration APIs”
on page 100 describes Configuration APIs.
For best results, read the contents of this guide
before
you install the server.
