Table 3. Rear Panel Ports (Continued)
Port
Description
Console
Used for service and maintenance, the console port (see
RS-232 RJ-45 connector, connects the product to a serial terminal such
as a PC or ASCII Terminal (also called a dumb terminal).
Configuration settings:
•
19200 bps
•
8 bits, no parity
•
1 stop bit
•
flow control off
12V DC, 1A
Electricity supply socket. (see
)
Reset
The reset button (see
) has three functions:
•
Restart the unit with the current startup configuration—Press (for less
than 1 second) and release the
Reset
button to restart the unit with
the current startup configuration.
•
Restart the unit with factory default configuration (shipping-config)—
Press the
Reset
button for at least 5 seconds but no longer than 15
seconds until all LED’s (see
on page 18) starts to blink, to
restart the unit with factory default configuration.
•
Restart the unit with factory default configuration (shipping-config and
factory delivered Wizard files) and remove Wizard files added by user
as well as user uploaded preference files — Press the
Reset
button
for 15 or more seconds until all LEDs blink faster
SmartNode 4130 Overview
17
SmartNode 4130 User Manual
1
• General information
