SmartNode 4130 Overview
15
SmartNode 4130 User Manual
1
• General information
SmartNode 4130 Overview
The SmartNode 4130 series comes with 2 or 4 BRI ports and with ISDN port fallback relay (depending on
model /R) solving many VoIP network integration problems encountered in real-world installations.
If available, the PSTN line can also synchronize the gateway. For applications without a PSTN line available
the optional ISDN HP (high precision clock /HP) provides an error-free ISDN data and fax transmissions.
Like every Trinity SmartNode, the SN4130 comes with a built-in WEB Wizard for fast and easy configuration.
You can build your own Web interface using the WEB Wizard functionalities.
Figure 1. SmartNode 4130 (Front)
www.patton.com
.
All the SN4130, models come equipped with one 10/100/1000 Base-T Ethernet port and with either 2 or 4
BRI T0/S0 ports.
The SmartNode 4130 Gateway performs the following major functions:
•
Eight channels of Voice over IP and local voice switching via 4 ISDN BRI S0/T0 ports. Each port can be
switched between NT and TE per software. Either port can be used as clock source. Selected models have a
Stratum 3 CO quality clock (HP) for installs where no external clock source is available.
•
For each ISDN port in NT mode a Phantom power supply can be switched on. The total delivered power is
4W.
•
Depending on the model, a fallback cut-through relay between ISDN BRI ports 0/0 and 0/1 electrically
connects the NT and TE port in case of power failure and enables life-line calls to the public ISDN network
(PSTN-supplied ISDN line must be used).
•
Standard compliant VoIP in accordance with SIPv2 protocol.
•
SIP registrar, SIP TLS, SRTP is optionally available at additional charge on all SN4130 models.
•
Supports 4 SIP to SIP calls and can be license upgraded to a total of 512* (additional cost)
•
USB 2.0 host port for 3G/4G modem support, which can be used for Survivability applications as a data
backup link.
-
A list of supported USB Models can be found in the release notes and in the Software Configuration
Guide
-*Supported under ideal conditions. Transcoding, debugging, and/or IP routing reduce processing capacity.
