SmartNode 4170 Overview
16
SmartNode 4170 User Manual
1
• General Information
SmartNode 4170 Rear Panel
The SmartNode 4170 is a compact VoIP Gateway that supports 15 up to 30 VoIP or Fax calls, by using either
G.711, G.722, T.38 or any other codec as indicated under Voice Processing in Appendix B,
page 37. The SmartNode 4170 rear panel ports are described in
Figure 2. SN4170 Rear Panel
Ports descriptions
The SmartNode 4170 Series rear panel ports are described in
Table 2. Rear panel ports
Port
Description
ETH 0/0
Auto-MDX Fast-/Gigabit-Ethernet port, RJ45 (see
), connects the
unit to an Ethernet WAN device (for example, a cable modem, DSL
modem, or fiber modem) or it connects to the Ethernet switch of a com-
pany LAN.
USB 2.0
USB 2.0 host port (see
) to connect a USB 3G/4G Cellular
Modem.
A list of supported USB Models can be found in the release notes and in
the Trinity Command Line Reference
Guide
PRI 0/0
RJ-45 connector providing E1 or T1 PRI interface, meeting
all requirements of ITU-T recommendations for G.703. Use a shielded E1
or T1 interface cable for 120 Ohm balanced connections to connect the
SmartNode with an NT or TE.
Note
for pin-outs
