Installing the gateway router
25
SmartNode 4650 Getting Started Guide
3 • SmartNode installation
•
IP addresses used for the WAN port
•
Subnet mask used for the WAN port
•
Sync serial line speed
•
IP addresses of central H.323 gatekeeper (if used)
•
IP addresses and/or URL of SIP servers or Internet telephony services (if used)
•
Login and password for PPPoE
Access
•
Login and password for SIP or H.323 based telephony services
•
IP addresses of central TFTP server used for configuration upload and download (optional)
Software tools
You will need a PC (or equivalent) with Windows Telnet or a program such as
Tera Term Pro Web
(included on
the SmartNode CD-ROM) to configure the software on your SmartNode router.
Power source
If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery
with large motors nearby, have a qualified professional test the power. Patton recommends that you include an
uninterruptible power supply (UPS) in the installation to ensure that VoIP service is not impaired if the
power fails.
Location and mounting requirements
The SmartNode router is intended to be placed on a desktop or similar sturdy, flat surface that offers easy
access to the cables. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you
should consider the need to access the unit for future upgrades and maintenance.
Installing the gateway router
SmartNode hardware installation consists of the following:
•
Placing the device at the desired installation location (see section
“Placing the SmartNode”
on page 25)
•
Connecting the interface and power cables (see section
“Installing cables”
)
When you finish installing the SmartNode, go to chapter 4,
“Initial configuration”
on page 32.
Placing the SmartNode
Place the unit on a desktop or similar sturdy, flat surface that offers easy access to the cables. The unit should be
installed in a dry environment with sufficient space to allow air circulation for cooling.
Note
For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front,
and rear of the unit.
