Installing the gateway router
30
SmartNode 4650 Getting Started Guide
3 • SmartNode installation
Figure 8. Power LED (SmartNode 4658 shown)
4.
Verify that the green
Power
LED is lit (see
figure 8
).
External AC Power Supply.
Do the following to connect the external AC power supply.
Note
Do not connect the power cord to the power outlet at this time.
1.
Insert the barrel type connector end of the AC power adapter into the power supply connector on the
SN465x unit (see
figure 9
).
2.
Insert the female end of the power cord into the AC power adapter.
Figure 9. Power connector location on rear panel
Power
ACT
LINK
Power
12V
, 1.25A
–
+