G.SHDSL Daughter Card (if applicable)
57
SmartNode 4650 Getting Started Guide
B • Specifications
G.SHDSL Daughter Card (if applicable)
Note
For information on configuring the G.SHDSL daughter card,
see Chapter 5,
“DSL Basic Configuration”
on page 41.
Table 12. G.SHDSL Daughter Card Specifications
Factor
Specs
DSL
• ITU-T G.991.2 (and Amendment 2)
• ITU-T G.991.2, Annex A, B, F, G
• Upgradable to ITU-T G.shdsl.bis—Annex F and G
• G.991.2 2/4 (1/2 pair) operation
• G.994.1 (G.hs) (per G.991.2)
• ITU-T G.991.2 Section E.9
(TPS-TC for ATM transport)
• ITU-T G.991.2 Section E.11
(TPS-TC for PTM transport)
DSL Connection
RJ-11/12 (2-wire)
Management
• I.610 OAM F4/F5
• Management interfaces: GUI and Telnet
• Software upgrade: GUI and TFTP
ATM Support
• Classical IPoA (RFC 1577/2225)
• PPPoE Client (over ATM) (RFC 2516)
• IPoA (RFC 2684/1483)
• ATM AAL5 encapsulation
• Max. 8 PVCs
• User selectable VC MUX and LLC MUX (default)
• Configurable auto-connection
• ATM QoS: UBR (default), CBR, and VBR-rt, VBR-nrt,
UBR: per VC queuing
• Auto-configuration: TR-037 & ILMI 4.0
Interworking/Interoperability
• G.SHDSL Interoperability:
-
Alcatel
-
NEC
-
Lucent Anymedia
-
Lucent Stinger
• BRAS Interoperability:
-
Cisco
-
Redback
