ForeFront
™
Sales:
+1 (301) 975-1000 •
Technical Support:
+1 (301) 975-1007 •
E-mail:
support@patton.com •
WWW:
www.patton.com
Document Number: 13404U4-001 Rev. B
Part Number: 07MPMC-CPCI-IG
Revised: February 20, 2012
page 1
Installation Guide
PMC Ethernet Access Module 6081
for the Model 6081RC EdgeRoute Network Access Server
This Installation Guide describes the procedures you must follow to install a PMC Ethernet
Access Module on the Model 6081RC EdgeRoute Network Access Server front blade. Please
note that this guide does not replace the detailed
Model 6081RC User Manual
nor the
Model
6081RC Applications Guide
available online at
www.patton.com/manuals
.
Set the Model 6081RC on a flat anti-static surface with the circuitry facing upward.
Figure 1.
Installing the PMC Ethernet Access Module
You must wear the anti-static strap to avoid electrostatic damage to the 6081RC or to
the PMC Ethernet Access Module. The 6081RC must not be installed in the chassis
when installing the PMC Ethernet Access Module. The PMC Ethernet Access Module
must be installed in PMC slot 2. Do not install it in PMC slot 1.
1
