Product hardware features
13
FiberPlex FPX6000 Series User Manual
1
• General Information
•
Route audio between devices, and view the state of existing audio routes
•
Rename devices and channels using your own friendly names
•
View comprehensive, configurable event logs
•
Check for and deploy Dante firmware updates
•
Save and reapply audio routing presets
•
Edit presets offline, and apply as configurations for new network deployments
•
Change sample rates and clock settings
•
View multicast bandwidth across the network
•
Customize the receive latency (latency before playout)
•
View transmit and receive bandwidth for each device
•
View device performance information, including latency stats, clock stability stats and packet errors
•
Lock and unlock devices
•
Filter device lists by name, sample rate, latency and other parameters
Product hardware features
Listed below are a few of the most important capabilities of the FPX6000 series. For more detailed specifica-
tions, go to appendix B,
•
Full support of Dante audio and video protocols
•
1-Gbps network interface
•
Support for audio and video unicast and multicast
•
15 audio flows
•
1 video flow
•
32-bit wide video interface capable of processing code streams up to 800 Mbps
•
HDCP 2.3 encryption over IP with secure EEPROM for key storage
•
8 audio channels from 44.1 kHz to 192 kHz
•
Tuneable audio delay to facilitate lip-sync control
•
Firmware updateable over the network
•
Supports updates for the control processor and codec
•
Supported by Dante Controller
•
Custom plug-in support in Dante Controller for configuring HDMI and codec components
•
Extended Dante API for video and ancillary channels
Package contents
•
Transmitter package contents include the FPX6000T/A3/PD48
