Decoder rear panel
18
FiberPlex FPX6000 Series User Manual
2
• Hardware Description
Decoder rear panel
Rear panel ports of the FPX6000 Series Decoder are shown in
and described in
Figure 6. Decoder rear panel ports
Ethernet ports
ETH2
: This port can be used to daisy-chain multiple devices, or as a “switch” port, allowing for additional net-
work connectivity (projector, camera, etc). The port does not support PoE.
ETH1 (PoE)
: This is the Primary Dante Network Connection, and is capable of accepting PoE. Suggested PoE
power is 802.3bt Type 3 PSE.
Cabling
For proper performance, always use HDMI 2.0-compliant, premium certified HDMI cables.
Power inputs—PoE and external PSU
PoE: 802.3bt Suggested. 30W minimum
External PSU: Not included. 48VDC @ 30W. Patton Part #______________
Table 3. Decoder rear panel ports descriptions
LEDs/Ports
Description
HDMI Output
HDMI 2.0/1.4b Video Source Output
ETH2
Used for Daisy-Chaining devices
ETH1 (PoE)
Dante Network (Primary Connection) and PoE input
PSU
48 VDC at 30W
