Introduction
47
SmartNode 5480 & 5490 User Manual
C
•
Cabling
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.
Console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in
Figure 12
.
Figure 12. Connecting a serial terminal
1
ote
See section
“Console Port”
on page 50 for console port pin-outs.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode 5400 Series device
ACT
LIN
K
RS
-2
32
Con
so
le
ETH
0/0
ET
H 0/1
Reset
12V
, 1.25A
–
+
