8
Fig 1: Main components CLIMOS
Item
Designation
A
Casing cover with quarter turn lock (4x)
B
EPP filter cover (2x)
C Filter
(2x)
D
Retaining clamps (4x)
E
Mounting bracket (4x)
F
Design filter cover (2x), Option
G
Heat exchanger box
H Control
unit
I
Fan box (2x)
J Housing
Tab. 1: Main components CLIMOS
Type
plate
The type plate clearly identifies the product. The information on the type plate is necessary for the safe use of the
product and in case of service-related questions. The type plate is located on the side of the casing next to the
electrical connections. The type plate must be permanently attached to the product.
Frost
protection
The CLIMOS is equipped with an automatic frost protection which prevents the heat exchanger from freezing at a too
low outside temperature. If the outside air temperature limit at the device falls below the threshold value a PTC heater
battery is activated. If the heat emission of the PTC heater battery is not sufficient enough, the fans
will be
temporarily
switched off when the treshold value is exceeded.
Monitoring of the supply air temperature for frost protection of an optional hydraulic heater battery
downstream is not available!
H
I
A
B
C
D
E
F
J
G