17
Observe the minimum distance required in relation to the finished floor!
Fig. 10: FFL distance for wall mounting (version LEFT)
2. Stick one of the supplied self-adhesive spacers
D
in each corner on the rear of the unit.
Fig. 11: Spacers mounting
3. Hook the FOCUS unit onto the fastening sheet by inserting the lugs
B
into the slots
E
in the lock seam at the
top of the rear cover.
Fig. 12: Hooking the unit into the fastening sheet
Fitting on Floor stand (optional)
The dimensions of the floor stand are as follows: footprint = (620 x 292) mm; variable height adjustment = between
280 mm and 320 mm using adjustable feet. The floor stand consists of two long base parts (each with two adjustable
feet) and two short base parts.
D
E
B
Summary of Contents for FOCUS 200 Base
Page 1: ...Translation of the original instruction manual Heat Recovery Unit FOCUS 200 Base...
Page 30: ...30 Dimensions Fig 33 Dimensional drawing...
Page 31: ...31 FOCUS 200 Base terminal scheme Fig 34 Terminal assignment terminal plan...
Page 36: ...36 PDE Manual_Focus 200 Base_V1 1 V1122 DE Subject to change...
