Fotoelektrik Pauly – Light barriers
E_52692 Ref. 2019-29
5/24
Fotoelektrik Pauly GmbH, Wahrbrink 6, D-59368 Werne, T: +49 2389/402 27-70, F: +49 2389/402 27-77
http://www.fotoelektrik-pauly.de, eMail: info@fotoelektrik-pauly.de
2.2 Intended use, general function and area of application
Acknowledgement of the contents of these operating instructions forms part of the intended use.
Notes and safety information must be observed in particular.
The Model CPV1038 System is
a mechanism for collision protection or distance monitoring exclusively for stationary power
driven cranes that run on a common crane track. The reflector centre on the other crane must
be situated at the optical device (lens) level.
intended for use in weatherproof applications where the direct influence of the weather is
prevented
exclusively intended for use in machinery within the meaning of the scope of EN 60204-32
(Electrical Equipment of Cranes), EN 15011 (Bridge and gantry cranes) and EN 12077-2
(Limiting devices).
When used as collision protection device, the moving crane is prevented from colliding e.g. brought
to a standstill in reference to the other crane (opposite crane).
When used as a distance monitoring device, a risk triggering approach of cranes is detected.
At least one device is required for each crane and the corresponding reflector is positioned at the
opposite wall/crane.
2.3 Incorrect use and foreseeable misuse
It is not permissible to use the device in any manner that deviates from the contents of the
operating instructions or operate it outside the prescribed areas of application.
The CPV1038 is not suitable for operation in
areas with significant challenging environmental requirements (e. g. potentially explosive
areas).
areas of excessive pollution influence where a proper function may not be ensured, despite
regular cleaning of the optical elements.
applications where normal operation due to excessive fog, excessive steam or excessive
smoke cannot be guaranteed.
systems where disconnecting the current does not lead to a safe mode.
collision protection and distance monitoring for cranes which run on a curved crane/rail track.
collision protection and distance monitoring for cranes which do not run on a common
crane/rail track.
collision protection of e.g. Industrial trucks or similar transport equipment.
use without reflector (please refer section 3)
Any technical alteration will result in cancellation of the product warranty!
