4
T
ROUBLE
S
HOOTING
Machine appears dead
Duty cycle has been exceed unplug and allow machine to rest for 30-
40mins then re-try
Machine appears dead
Bin is full, empty bin
Machine is dead
The machine is designed to only work with the bin provided
Machine is dead
Make sure that safety switch is depressed when cutter head is
mounted on the bin
Machine is jammed
Reverse paper
Machine is making noises
Oil cutters with shredder oil
I
MPORTANT
A
DVICE
Remove all paper clips and staples from paper before shredding. Unit will cut staples, however it is
not recommended.
We recommend oiling regularly the cutters with the special shredder oil.
This shredder is equipped with a motor overload protection device to protect the machine in case of
Paper jams and overloads (in continuous use for more than 1min).
Both abnormal operations may result in the activation of the automatic motor overload protection,
which cuts the power of the unit. If this occurs you should:
1.
Unplug the power cord from the AC outlet and wait at least 15 minutes for the overload
protection to reset. Tear or cut off any excess paper from the top of the shredder.
2.
Plug the power cord back into the AC outlet and place the Switch on REV. Pull the remaining
paper out of the cutters. Place the Switch back to the Auto position if necessary.
3. With the Switch in the AUTO position and the feed opening clear, you are now ready to resume
normal shredding.
For more information, send an email to:
W
ARRANTY
The machine has a warranty of 2 years (the warranty is not applicable if too many papers were
inserted, or the machines has been used for an inappropriate purpose).
T
ECHNICAL
D
ATA
Voltage....................................................................................................................230V
Power consumption.................................................................................................200W
Max width shredding ..............................................................................................220mm/9’’
Max Pages shredding ..............................................................................................12pages 80Gr
Shredding Size ........................................................................................................6mm(Strip Cut)
Dimension ...............................................................................................................292x172x354mm
Weight.....................................................................................................................3,2 KGS
