Page 53
LoGdnL.
DOWNLOAD LOG
Log download function, the records are transmitted through the USB key of the instrument. This function
can be interrupted at any time by pressing the
key.
At the end of the transmission you are prompted to delete the log, confirm by pressing PRG or cancel
by pressing the
weight key.
LoGErS.
LOG DELETION
Log delete function, confirm with the
key or cancel with the
key.
NOTE:
In the download function of the log the records are transmitted in the followings format
(starting from the oldest record):
<Tempo>; <Gross>; <Net>; <Peak>; <Inputs>; <Outputs> CR LF
Or in case of Date and Time option
<Date> ; <Time> ; <Lordo> ; <Netto> ; <Picco> ; <Ingressi> ; <Uscite> CR LF
Where:
Tempo:
field consists of six ASCII characters with the value of the recording time justified to the right
(value in seconds from 0 to 999999, without insignificant zeros) If the LOG function is configured to
store a single record at a time, this field is always 0.
Date:
field consists of eight ASCII characters with the value of the recording date, in the format “dd/
mm/yy”.
Time:
field consists of eight ASCII characters with the value of the recording time, in the format
“hh:mm:ss”.
Gross Net Peak:
fields consisting of 8 ASCII characters with the weight value justified to the right
(without insignificant zeroes, with decimal points and negative signs).
Inputs:
two ASCII characters, “0” (30h, input disabled) or “1” (31h, input enabled). Which indicate
the status of input 1 and the status of input 2.
Outputs:
two ASCII characters, ‘’0’’ (30h, ouput disabled) or ‘’1’’ (31h, output enabled). Which
indicate the status of output 1 and the status of output 2.
Summary of Contents for DAT11
Page 2: ...Page II ...
Page 83: ...Page 81 ...
