1. OPENING THE STROLLER:
Release the storage hook, lift the
handlebar, unfold the stroller and lock in both joints.
2.
INSTALLING THE FRONT WHEEL:
Place the wheel axle at U
tube groove and attach hook-shaped gasket. Use wrench to tighten
the nuts on both sides. Make sure the gasket is tightened by the
two nuts.
3. INSTALLING THE REAR WHEELS:
Insert the gear onto the axle,
then, place the wheel and, washer onto axle. Insert the pin clip
through the hole on the axle, after finishing the above then cover with
the wheel cap. Repeat on the other side.
4. INSTALLING THE FOOTBOARD:
Align the footboard to the
holes at the bottom of the stroller and tighten the screws with a
phillips head screw driver.
5. CUP HOLDER:
Align the cup holder with the fixtures on the side
of the handle tube - Firmly pull both sides over until it snaps into
place.
6. OPERATING BREAKS:
Step on the brake bar to stop the stroller,
and lift it up to release the brake.
7. EXTRA SAFETY FEATURE:
Fasten the safety leash to pet’s
harness or collar.
8. OPENING WINDOWS OR ENTRANCE POINTS:
Unzip the mesh
to open the window or entrance and zip up to secure pet.
9. FOLDING THE STROLLER:
Unzip the canopy window, then
press the folding button as towards you to fold the stroller and
fasten the storage hook.
AIRPORT
INTERNATIONAL
INTERNATIONAL
CITY TRANSIT
PIN CLIP -
GEAR -
WASHER -
HOOK-SHAPED GASKET -
NUT-
WRENCH -
