4.Instructions
1. Use of two-dimensional scanner (one-dimensional optional)
The scanner is on the top of the device. When using, enter the
“
Menu
”
,
select
“
DEMO
”
>
two-dimensional (or one-dimensional) scan, align the reading window with the barcode, slightly
press the left , right scan button on the device or click "start" on the interface, the reading
window will emits the two-dimensional illumination region or one-dimensional light beam, cover
the barcode with the lighting beam emitted by the scanner, then the barcode will be read
correctly.
Note that the barcode cannot be read if it is scanned with tilted angles or without being covered
the whole area.
After reading success, the device will make a short sound, the barcode and the read times will be
rapidly displayed in the scanning area.
Figure 4-1-1
Right,Wrong,Operation demonstration for scanning bar code(2D)
Figure 4-1-2
Figure 4-1-3
2. Use of contactless card
The reading area of the contactless card is the underside of the terminal, with the reading